The following diagram and instructions are meant to assist you to refill your specific inkjet printer. Printed copies of these instructions are also included when you purchase one of our Inkjet Refill Kits. If you require additional assistance, please contact Graphic Connection directly online or by phone.

1. Remove the plastic ball from the filling hole using a pin or needle.
   (Save ball to re-seal hole after refilling).

2. Assemble the syringe and filling needle and fill with 5-10ml of ink.

3. Hold the cartridge upright and insert the filling needle into the filling hole. (Do not insert fully - be careful not to pierce the rubber ink sack).

4. Slowly inject the ink into the cartridge.

5. Withdraw the syringe and replace the sealing ball. (Insert firmly to prevent leakage).

6. Mount the cartridge and run a priming cycle as per printer instructions.

Return to Index