The following diagram and instructions are meant to assist you to refill your specific inkjet printer. Printed copies of these instructions are also included when you purchase one of our Inkjet Refill Kits. If you require additional assistance, please contact Graphic Connection directly online or by phone.

1. Seal the outlet hole(s) in the base of the cartridge with adhesive tape.

2. Peel back the bottom of the sticky label to reveal the sealed filling hole(s).

3. Assemble the syringe and filling needle and fill with the appropriate colour ink.

4. Puncture the seal to the filling hole with the filling needle. (See diagram for filling hole color). Insert the filling needle half an inch (12.5mm) into the cartridge.
   Note: The cartridge contains sponge and a slight resistance might be felt.

5. Slowly inject up to 15ml. of ink or until ink appears at the filling hole.

6. Seal the filling hole with some adhesive tape.

7. Unused ink may be returned to the bottle. Clean the syringe with water and dry for future use, or use with a different color ink.

8. Mount the cartridge in the printer and allow to stand for up to 24 hours. (Allows ink to flow to the print head).
   NOTE: If cartridge is refilled before it is empty this time is greatly reduced.

9. Mount the cartridge and run a priming cycle as per printer instructions.

Return to Index