The following diagram and instructions are meant to assist you to refill your specific inkjet printer. Printed copies of these instructions are also included when you purchase one of our Inkjet Refill Kits. If you require additional assistance, please contact Graphic Connection directly online or by phone.

1. Make a 3mm filling hole in the top of the cartridge, using a small drill, above the ink reservoir in the position shown.

2. Assemble the syringe and filling needle and fill with the correct color ink.

3. Inject ink into the filling hole until the chamber is almost full.

4. Seal the filling hole with the plug provided, or with strong adhesive tape.

5. Clean the syringe with water and dry before refilling with another color.

6. Install the cartridge and run a priming cycle as per printer instructions.

Return to Index